Drain-All® Condensate Drains have been the industry leader for over 20 years. Installed at collection points anywhere in your pneumatic system, these heavy-duty drains can be depended upon to discharge the condensate automatically and to eliminate the need for periodic or constant blow-downs so costly in time and compressed air losses.
Kaeser also offers suitable product versions for special applications, such as aggressive condensate, working pressures up to 913 psig, as well as in vacuums drain valve or frost regions. This baffle 260 causes the condensate 280 to form a water seal between the sensor 200 and the discharge orifice of the drain valve 220.

2B) which is connected between the timer integrated circuit 28 and the transistors and solid state switches 32. This monitoring circuit 24A monitors the lengths between successive valve opening operations, and triggers the circuit 24 to open the valve 22 for a predetermined time if the interval between successive valve opening operations exceeds a predetermined time.
For instance, moisture can wash lubrication from air tools and production equipment causing downtime and maintenance; an inconsistent supply of dry air can cause production quality problems; and excessive rust and scale can form in the air distribution system.

In addition, if through some failure in the drain valve arrangement, the drain valve is not opening even when condensate to be discharged is collecting at the drain valve, a measure of automatic drainage of this condensate will be obtained for as long as the monitoring circuit continues to bring about valve opening.
The timer can be mounted on any solenoid valve with a square DIN connection, and will operate on 24, 120 and 230 volts AC. Our experienced professionals manufacture these valves using optimum quality raw material by employing latest technology at our sound production unit.
1 consists of an electrical sensing probe 20 inserted in a condensate drain line 21 of the steam system upstream of a solenoid operated condensate drain valve 22 and so as to be electrically insulated from the wall of the drain line. As the condensate level drops, the magnet moves away and the valve closes again.

Contact our experienced sales staff who will gladly assist you with selecting the best condensate drains to fulfill your requirements. About 23% of these are pneumatic parts, 18% are valves, and 18% are air-compressor parts. The condensate drain body (by NJ Meter) is made of cast aluminum, while the valve assembly is made of brass and the float is made of stainless steel.
These valves have a simple construction and operate using a float type system. Liabilities- Whenever the air handling unit of an air conditioning system is located in an attic or the upper stories of a building, the risk of water damage due to drain stoppage and condensate overflow is inherent and unavoidable.
The most effective means of controlling moisture in the system is to install a New Jersey Dri Air Compressed Air Separator as far as possible from the compressor with New Jersey Condensate Drains installed wherever moisture collects in the lines. Economical alternative to electric motorized ball drain valves.